Skip to content
Bishoff Construction Services LLC

Metal Fascia & Soffits

Wrap rotting or peeling trim in metal so you never paint it again. Serving Sierra Vista and Cochise County.

Fascia is the board that runs along the edge of your roof. Soffit is the underside of the overhang. On a lot of older homes, both are bare wood. And bare wood in this sun means peeling paint, cracking, and eventually rot.

We cover fascia with formed metal and replace or cover soffits with metal panels. Once it is done, there is nothing to scrape or repaint. It also gives your gutters a solid edge to hang on.

Signs your fascia or soffits need work

  • Paint on the roof trim peels a year or two after you paint it
  • Soft, cracked, or rotten wood along the roof edge
  • Gutters pulling loose because the board behind them is weak
  • Birds, bats, bees, or pack rats getting into the eaves
  • Water stains on the underside of the overhang

Why it matters here

South- and west-facing trim in Sierra Vista gets punished by afternoon sun. Paint just does not last long on it. Metal does.

Open or damaged soffits are also an open door for critters. Bats, birds, and bees love a gap under a roof overhang. Solid or vented metal soffit panels close that up while still letting the attic breathe.

How it works

  1. 1

    Check the wood

    We look for rot first. Any bad wood gets replaced before we cover it, so nothing is hiding under the metal.

  2. 2

    Choose a color

    Pick a finish that works with your house and gutters.

  3. 3

    Form and wrap

    We bend the metal to fit your fascia and install soffit panels, vented where the attic needs airflow.

  4. 4

    Finish details

    Corners, ends, and joints are finished clean so it looks like it belongs on the house.

FAQ

Metal Fascia & Soffits questions

Can you put metal fascia over rotten wood?

We do not cover up rot. If the wood is bad, we replace it first and then wrap it. Covering rot just hides a problem that keeps getting worse.

Will metal soffits keep birds and bats out?

Yes. Closing up open or broken soffits is one of the best ways to keep birds, bats, and bees out of your eaves. We use vented panels where needed so your attic still gets air.

Do I need to paint metal fascia?

No. The metal comes with a factory finish, so there is nothing to paint. That is the main reason people switch.

Can you do fascia, soffits, and gutters together?

Yes, and that is usually the best way to do it. Call Bishoff Construction Services at (520) 266-3090 and ask about doing the whole roof edge at once.

Who installs metal fascia in Sierra Vista?

Bishoff Construction Services does. We are licensed and bonded, ROC # 363752, 364460, and 364461. Call (520) 266-3090 for an estimate.

Ready for an estimate?

Call or text and tell us what's going on. We'll come out, take a look, and give you a written estimate.

Call (520) 266-3090 Text